How to Quiet Noisy Water Pipes

how-to-quiet-noisy-water-pipes

There is nothing more terrifying than hearing sounds in your house especially when you are all alone. You may be hearing loud banging or whistling sounds, but do you know where it is coming from? These annoying sounds are probably coming from noisy water pipes.

Noisy water pipes are caused by having air chambers in the water, high water pressure or loose mounting straps. This is why it is important for you to know how to quiet these noisy water pipes.

1. Refill the Air Chambers

The easiest fix would be to fill air in the air chambers. The air chamber is a vertical pipe that is attached to the wall near a valve or faucet where the water supply pipe is coming out of the wall. The air chamber works as a support so the pipe does not slam against the wall when the faucet is not on. It takes the shock of fast moving water onto itself so the pipe does not get the chance to hit the wall.

As time goes on, these air chambers get filled in with water, resulting in a water hammer. When the hammering action takes place, it makes terrifying sounds that can damage your plumbing system. Therefore, it is important to know how to deal with these water hammers:

  1. Shut the main water supply valve off
  2. Open the lowest and highest faucet in your house
  3. When all the water has drained, turn the low faucet off
  4. Turn the main water valve on
  5. Let the water flow and then turn the high faucet off

2. Fix the Water Pressure

Another quick and easy way to fix these noisy water pipes would be by adjusting the water pressure. Nowadays, homes have regulators that are located in the main water supply. The water pressure is set between 30 to 55 pounds per square inch, so if the regulator does not read this, fix the water pressure with the help of a screwdriver.

If your house does not have a water pressure regulator, it is time to get one. Having high water pressure is not only expensive and useless, but it can also damage your appliances. With the help of a pressure regulator, you will be able to increase the longevity of your appliances while keeping the water bills affordable.

Tighten the Loose Pipe Mounting Straps

Loose mounting straps can cause fluctuations in the water pressure. A pipe mounting strap is typically a vinyl coated nail in hangers and hooks that secure pipes with a frame. A loose pipe strap can cause the pipes to move freely against the frame when the water is turned off or on.

Check and see if the exposed pipes are accessible and not being covered by a wall. All pipes should be tightly connected and secured properly. If they are not, you will need to secure these pipes immediately.

If you feel that you are unable to quiet noisy pipes by yourself at home, contact a plumber. If you reside in the Pompano Beach area, look for plumbers near Pompano Beach or click here. With the help of our services, your plumbing problems will be solved in no time.

Please follow and like us:

Leave a Reply

Your email address will not be published. Required fields are marked *